[Csnd] Jaap Vink Feedback instrument

Dear all,

I would like to share with you a simple experiment I made a few days ago. It is a free transcription of the ring-modulated feedback patch from Jaap Vink developed in the 70s with analog gear. It is tested in csound 7. If you play around with the parameters, like the frequency of the ring modulator or the equalizer, you’ll get quite surprising sounds.

https://github.com/antpl/csound/tree/main/feedback

Best,

Luís Csound mailing list Send bugs reports to Discussions of bugs and features can be posted here

Very impressive Luis!
I test successfulyl also various poscil frequencies, whereas eq frequencies are more delicate and difficult to tweak.
Gratulations and thanks
Giovanni

Dear all,

I would like to share with you a simple experiment I made a few days ago. It is a free transcription of the ring-modulated feedback patch from Jaap Vink developed in the 70s with analog gear. It is tested in csound 7. If you play around with the parameters, like the frequency of the ring modulator or the equalizer, you’ll get quite surprising sounds.

https://github.com/antpl/csound/tree/main/feedback

Best,

Luís
Csound mailing list Csound@listserv.heanet.ie https://listserv.heanet.ie/cgi-bin/wa?A0=CSOUND Send bugs reports to https://github.com/csound/csound/issues Discussions of bugs and features can be posted here

Csound mailing list Csound@listserv.heanet.ie https://listserv.heanet.ie/cgi-bin/wa?A0=CSOUND Send bugs reports to https://github.com/csound/csound/issues Discussions of bugs and features can be posted here

This is great! One thing though, I had to modify the code to run, the random:i in the init functions at the start produced the following error:

syntax error, opcode ‘init’ for expression with arg types i returns out-args != 1, line 36
from file c:\Users\rory\sourcecode\cabbage3-recipes\samples\Feedback.csd (1)
syntax error, opcode ‘init’ for expression with arg types i returns out-args != 1, line 37
from file c:\Users\rory\sourcecode\cabbage3-recipes\samples\Feedback.csd (1)

I’m using Csound 7.0 on Windows. I had to change it to:

fb1:a = init:a(random:i(0.5, 1))
fb2:a = init:a(random:i(0.5, 1))

It makes a nice synth, although the initial delay when it starts make it less useable in that way. But the timbres are very nice. It’s fun to stack the carrier wave with harmonics too.

Csound mailing list Csound@listserv.heanet.ie https://listserv.heanet.ie/cgi-bin/wa?A0=CSOUND Send bugs reports to https://github.com/csound/csound/issues Discussions of bugs and features can be posted here

Giovanni and Rory,

thanks for testing!

Rory: this may be due to the fact that I am not using the very last csound 7 version? I noticed now that I haven’t updated it yet to the newest Trapani release. I have the --Csound version 7.0 (double samples) Feb 7 2026

So there is a difference between fb1:a = init(random:i(0.5, 1)) and fb1:a = init:a(random:i(0.5, 1)) The first works in my csound 7 from February. So the init needs to produce an audio signal although the random:i is an i-signal.

Csound mailing list Send bugs reports to Discussions of bugs and features can be posted here

I think certain things were permitted in the beta builds that have since been locked down, otherwise this could be flagged as breaking backward compatibility?

Giovanni and Rory,

thanks for testing!

Rory: this may be due to the fact that I am not using the very last csound 7 version? I noticed now that I haven’t updated it yet to the newest Trapani release. I have the --Csound version 7.0 (double samples) Feb 7 2026

So there is a difference between fb1:a = init(random:i(0.5, 1)) and fb1:a = init:a(random:i(0.5, 1)) The first works in my csound 7 from February. So the init needs to produce an audio signal although the random:i is an i-signal.

This is great! One thing though, I had to modify the code to run, the random:i in the init functions at the start produced the following error:

syntax error, opcode ‘init’ for expression with arg types i returns out-args != 1, line 36
from file c:\Users\rory\sourcecode\cabbage3-recipes\samples\Feedback.csd (1)
syntax error, opcode ‘init’ for expression with arg types i returns out-args != 1, line 37
from file c:\Users\rory\sourcecode\cabbage3-recipes\samples\Feedback.csd (1)

I’m using Csound 7.0 on Windows. I had to change it to:

fb1:a = init:a(random:i(0.5, 1))
fb2:a = init:a(random:i(0.5, 1))

It makes a nice synth, although the initial delay when it starts make it less useable in that way. But the timbres are very nice. It’s fun to stack the carrier wave with harmonics too.

Csound mailing list Csound@listserv.heanet.ie https://listserv.heanet.ie/cgi-bin/wa?A0=CSOUND Send bugs reports to https://github.com/csound/csound/issues Discussions of bugs and features can be posted here

Csound mailing list Csound@listserv.heanet.ie https://listserv.heanet.ie/cgi-bin/wa?A0=CSOUND Send bugs reports to https://github.com/csound/csound/issues Discussions of bugs and features can be posted here

Csound mailing list Csound@listserv.heanet.ie https://listserv.heanet.ie/cgi-bin/wa?A0=CSOUND Send bugs reports to https://github.com/csound/csound/issues Discussions of bugs and features can be posted here

thanks for sharing luis --- very interesting sound and quite instructive code.

i had the same issue as rory with the code, but the solution with init:a does not lead to the sounding result which i have with
   fb1:a init random:i0\.5, 1
   fb2:a init random:i0\.5, 1

i changed the carrier frequency from 200 to randomi:k100,300,1/10,3 and liked the result. it would be nice to create a system where certain parameters change depending on situations. martin neukom did this in a quite simple csound file in his Signale Systeme Klangsynthese book twenty years ago, with crazy results.

I think certain things were permitted in the beta builds that have since been locked down, otherwise this could be flagged as breaking backward compatibility?

    __
    Giovanni and Rory,

    thanks for testing!

    Rory: this may be due to the fact that I am not using the very last
    csound 7 version? I noticed now that I haven't updated it yet to the
    newest Trapani release. I have the --Csound version 7.0 (double
    samples) Feb 7 2026

    So there is a difference between fb1:a = initrandom:i\(0\.5, 1) and
    fb1:a = init:arandom:i\(0\.5, 1) The first works in my csound 7 from
    February. So the init needs to produce an audio signal although the
    random:i is an i-signal.

    This is great! One thing though, I had to modify the code to run,
    the random:i in the init functions at the start produced the
    following error:

    syntax error, opcode 'init' for expression with arg types i
    returns out-args != 1, line 36
    from file c:\Users\rory\sourcecode\cabbage3-
    recipes\samples\Feedback.csd 1
    syntax error, opcode 'init' for expression with arg types i
    returns out-args != 1, line 37
    from file c:\Users\rory\sourcecode\cabbage3-
    recipes\samples\Feedback.csd 1

    I'm using Csound 7.0 on Windows. I had to change it to:

     fb1:a = init:arandom:i\(0\.5, 1)
     fb2:a = init:arandom:i\(0\.5, 1)

    It makes a nice synth, although the initial delay when it starts
    make it less useable in that way. But the timbres are very nice.
    It's fun to stack the carrier wave with harmonics too.
    Csound mailing list Csound@listserv.heanet.ie
    <mailto:Csound@listserv.heanet.ie> https://listserv.heanet.ie/cgi-
    bin/wa?A0=CSOUND <LISTSERV 16.5 - CSOUND List at LISTSERV.HEANET.IE;
    Send bugs reports to Issues · csound/csound · GitHub
    <https://github.com/csound/csound/issues&gt; Discussions of bugs and
    features can be posted here

    ____ Csound mailing list Csound@listserv.heanet.ie
    <mailto:Csound@listserv.heanet.ie> https://listserv.heanet.ie/cgi-
    bin/wa?A0=CSOUND <LISTSERV 16.5 - CSOUND List at LISTSERV.HEANET.IE;
    Send bugs reports to Issues · csound/csound · GitHub
    <https://github.com/csound/csound/issues&gt; Discussions of bugs and
    features can be posted here

Csound mailing list Csound@listserv.heanet.ie <mailto:Csound@listserv.heanet.ie> https://listserv.heanet.ie/cgi-bin/ wa?A0=CSOUND <LISTSERV 16.5 - CSOUND List at LISTSERV.HEANET.IE; Send bugs reports to Issues · csound/csound · GitHub <https://github.com/ csound/csound/issues> Discussions of bugs and features can be posted here

Csound mailing list
Csound@listserv.heanet.ie

Send bugs reports to
        Issues · csound/csound · GitHub
Discussions of bugs and features can be posted here

Hi Joachim,

Thanks for trying it out and for the feedback, I’m really glad it worked for you.

I’ll upload the init:a for fb1 and fb2 in the code.

I agree it would be interesting to build a system where parameters respond to the situation, for example by reacting to the output or to some measured state of the instrument, instead of just wandering randomly.

I didn’t know about the Neukom example, and I’m curious about it. Do you remember roughly where in the book it is, or which file or chapter?

Best,
Luís

Csound mailing list Send bugs reports to Discussions of bugs and features can be posted here

hi luis -
can you check whether the init:a solution really works?
to repeat: for me the sound was very different from writing
    fb1:a init random:i0\.5, 1
    fb2:a init random:i0\.5, 1

yes i found the example in neukom's book =)
5.1.4.4, page 383

it was always very inspiring for me, and i wrote this composition based on it:

(first track on joachim heintz)

ciao -
  joachim

Hi Joachim,

Thanks for trying it out and for the feedback, I’m really glad it worked for you.

I’ll upload the |init:a| for fb1 and fb2 in the code.

I agree it would be interesting to build a system where parameters respond to the situation, for example by reacting to the output or to some measured state of the instrument, instead of just wandering randomly.

I didn’t know about the Neukom example, and I’m curious about it. Do you remember roughly where in the book it is, or which file or chapter?

Best,
Luís

thanks for sharing luis --- very interesting sound and quite instructive code.

i had the same issue as rory with the code, but the solution with init:a does not lead to the sounding result which i have with
fb1:a init random:i0\.5, 1
fb2:a init random:i0\.5, 1

i changed the carrier frequency from 200 to randomi:k100,300,1/10,3 and liked the result. it would be nice to create a system where certain parameters change depending on situations. martin neukom did this in a quite simple csound file in his Signale Systeme Klangsynthese book twenty years ago, with crazy results.

I think certain things were permitted in the beta builds that have since been locked down, otherwise this could be flagged as breaking backward compatibility?

\_\_
Giovanni and Rory,

thanks for testing\!

Rory: this may be due to the fact that I am not using the very last
csound 7 version? I noticed now that I haven&#39;t updated it yet to the
newest Trapani release\. I have the \-\-Csound version 7\.0 \(double
samples\) Feb  7 2026

So there is a difference between fb1:a = init\(random:i\(0\.5, 1\)\) and
fb1:a = init:a\(random:i\(0\.5, 1\)\) The first works in my csound 7 from
February\. So the init needs to produce an audio signal although the
random:i is an i\-signal\.
This is great\! One thing though, I had to modify the code to run,
the random:i in the init functions at the start produced the
following error:

syntax error, opcode &#39;init&#39; for expression with arg types i
returns out\-args \!= 1, line 36
from file c:\\Users\\rory\\sourcecode\\cabbage3\-
recipes\\samples\\Feedback\.csd \(1\)
syntax error, opcode &#39;init&#39; for expression with arg types i
returns out\-args \!= 1, line 37
from file c:\\Users\\rory\\sourcecode\\cabbage3\-
recipes\\samples\\Feedback\.csd \(1\)

I&#39;m using Csound 7\.0 on Windows\. I had to change it to:

    fb1:a = init:a\(random:i\(0\.5, 1\)\)
    fb2:a = init:a\(random:i\(0\.5, 1\)\)

It makes a nice synth, although the initial delay when it starts
make it less useable in that way\. But the timbres are very nice\.
It&#39;s fun to stack the carrier wave with harmonics too\.
Csound mailing list Csound@listserv\.heanet\.ie

<mailto:Csound@listserv.heanet.ie> https://listserv.heanet.ie/cgi-
bin/wa?A0=CSOUND <LISTSERV 16.5 - CSOUND List at LISTSERV.HEANET.IE;
Send bugs reports to Issues · csound/csound · GitHub
<https://github.com/csound/csound/issues&gt; Discussions of bugs and
features can be posted here

\_\_\_\_ Csound mailing list Csound@listserv\.heanet\.ie

<mailto:Csound@listserv.heanet.ie> https://listserv.heanet.ie/cgi-
bin/wa?A0=CSOUND <LISTSERV 16.5 - CSOUND List at LISTSERV.HEANET.IE;
Send bugs reports to Issues · csound/csound · GitHub
<https://github.com/csound/csound/issues&gt; Discussions of bugs and
features can be posted here
Csound mailing list Csound@listserv.heanet.ie <mailto:Csound@listserv.heanet.ie> https://listserv.heanet.ie/cgi- bin/ wa?A0=CSOUND <LISTSERV 16.5 - CSOUND List at LISTSERV.HEANET.IE; Send bugs reports to Issues · csound/csound · GitHub <https://github.com/ csound/csound/issues> Discussions of bugs and features can be posted here

Csound mailing list
Csound@listserv.heanet.ie
LISTSERV 16.5 - CSOUND List at LISTSERV.HEANET.IE
Send bugs reports to
Issues · csound/csound · GitHub
Discussions of bugs and features can be posted here

Csound mailing list Csound@listserv.heanet.ie <mailto:Csound@listserv.heanet.ie> https://listserv.heanet.ie/cgi-bin/ wa?A0=CSOUND <LISTSERV 16.5 - CSOUND List at LISTSERV.HEANET.IE; Send bugs reports to Issues · csound/csound · GitHub <https://github.com/ csound/csound/issues> Discussions of bugs and features can be posted here

Csound mailing list
Csound@listserv.heanet.ie

Send bugs reports to
        Issues · csound/csound · GitHub
Discussions of bugs and features can be posted here